Heidts Pro-G Independent Rear Suspension Kits IRC-800
$7,519.00
Description
Heidts Pro-G Independent Rear Suspension Kits
Heidts Pro-G IRS suspension kits are designed to bring the superior ride and handling of independent rear suspension to your muscle car. Out-handle the competition and put all of that horsepower to the ground. Heidts Pro-G IRS suspension kits produce 1/2 degree of camber curve at 3/4 of bump, especially during very high cornering loads. Features include: * Cast iron Ford 9 in. center section mounted in an aluminum housing * 31-spline posi-traction hooked up to heavy-duty half shaft CV joint axle shafts * Tubular upper and lower control arms * Steel outer uprights * Top crossmember * Frame mounting brackets * Wilwood rear brake rotors and calipers * Billet aluminum single adjustable coilover shocks with silver powdercoated springs
Overview
Brand:
Heidts
Manufacturer?s Part Number:
IRC-800
Part Type:
Rear Suspension Packages
Product Line:
Heidts Pro-G Independent Rear Suspension Kits
Summit Racing Part Number:
HDT-IRC-800
UPC:
00887753178817
Third Member Included:
No
Third Member Case Style:
Ford 9 inch
Third Member Case Material:
Aluminum
Pinion Support Material:
Steel
Pinion Support Finish:
Natural
Axle Shafts Included:
No
Upper Control Arms Included:
Yes
Lower Control Arms Included:
Yes
Control Arm Style:
Tubular
Control Arm Material:
Steel
Control Arm Color:
Natural
Air Bags Included:
No
Rear Shocks/Struts Included:
Yes
Rear Shock Type:
Single adjustable coilover
Coilover Springs Included:
Yes
Spring Finish:
Gray/Silver
Suspension Package Finish:
Bare
Bushings Included:
Yes
Bushing Material:
Polyurethane
Bushing Color:
Black
Sway Bar Included:
Yes
Sway Bar Diameter (in.):
0.875 in.
Sway Bar Diameter (mm):
22.00 mm
Watts Link Included:
No
Panhard Bar Included:
No
Adjustable Panhard Bar Included:
No
Upper Trailing Arms Included:
No
Adjustable Upper Trailing Arms Included:
No
Lower Trailing Arms Included:
No
Adjustable Lower Trailing Arms Included:
No
Trailing Arm Mount Braces Included:
No
Trailing Arm Hardware Included:
No
Rotors Included:
No
Calipers Included:
No
Quantity:
Sold as a kit.
Notes:
This is the base kit with no differential, axles, or brakes. Specify spring rate when ordering.
Reviews (0)
Related products
1923 Plain Budget T-Bucket Frame Assembly, Chevy
Chevy Spindle Type, Natural
- This part number does not include a rear axle housing or engine/transmission mounts (as pictured). If you wish to add these items to your chassis, simply purchase these items along with your frame kit.
- Comes with a 1-1/2 X 3? rectangular steel tube frame with 102? wheelbase and the rear crossmember is c-notched for added rear axle clearance
- Features spring-behind front suspension with 4? drop tube axle and hairpin radius rods
- Comes with your choice of ?37-?48 Ford or ?49-?54 Chevy-style spindles with king pins fitted
- Available with plain or chrome suspension components to better suit your style
1968-72 Chevy Chevelle 9 Inch Rear Axle w/Disc Kit, 3.50:1
Rear Position, Axle Shafts Included, 31 Axle Splines
- Designed to replace the original ?68-?72 GM A-Body rearend housing
- All new stamped steel housing and fully welded 3? tubes ? Bare steel
- Precision assembly for the correct backlash, preload, and proper amount of pinion shims to ensure the correct pattern on the ring gear teeth
- Nodular iron housing is stronger than OEM ?gray? iron and has 4 lbs of additional reinforcement
- Brake kits includes two bolt-on caliper brackets, two 11-1/4? vented rotors, two GM metric style calipers (non-emergency brake), brake pads and hardware for increased stopping power
1968-72 GM A-Body Ford 9 In Coilover Axle w/o Brakes, 3.50:1
Rear Position, Axle Shafts Included, 31 Axle Splines
- Designed to replace the original 1968-1972 GM A-Body rearend housing
- Compatible with the stock 4-link trailing arm rear suspension found in your Chevelle, Malibu, El Camino, Sprint, GTO, LeMans, Tempest, F85, Cutlass, 442, Special, Skylark and Gran Sport
- Third member is hand-assembled by our trained technicians for an unbeatable combination of quality and value
- Precision assembly for the correct backlash, preload, and proper amount of pinion shims to ensure the correct pattern on the ring gear teeth
- Includes a reusable differential gasket with a steel core, mounting hardware, 4oz bottles of Redline friction modifier and forged u-bolts.
1982-04 S10 & G-Body Tubular Upper Control Arms Kit, Powdercoated
8.25? Mount Center to Ball Joint Center, Steel, Black
- Speedway Motors G-Body and S10 tubular control arms offer all the same benefits at a fraction of the cost of other brands
- Tubular upper control arm features increased header clearance compared to stock stamped arms which is vital for S10 V8 swaps
- Heavy duty tubular design and increased positive caster for optimum handling and performance
- 1-1/4? OD .120? wall thickness DOM steel tubing is precision bent, jig located and MIG welded for maximum strength
- New ball joints and Delrin bushings virtually eliminate flex and reduce friction to improve handling while remaining squeak freev
67-69 Camaro/68-74 Nova Tubular Control Arms, C/O & Sway Bar Kit
67-69 Chevy Camaro, 69-74 Chevy Nova, Powder Coated
- Heavy duty tubular design and black powder coated finish is the perfect addition to any resto-mod build
- Lower control arm has a deeper spring pocket which lowers the ride height 1-1/2? to 2? compared to stock
- Upper control arms have improved geometry and are designed for 4 degrees of caster to firmly plant modern radial tires
- The threaded aluminum body allows easy ride height adjustment
- Has greater durability by locating the spring pressure in the frame and not on a single stud
Reviews
There are no reviews yet.